- deutsche Beschreibung folgt demnächst -
Machines PG-1350 most distinguish characteristic is the high operating speed in fixing two self fixing hangers simultaneously onto backboards of MDF, fibreboard by means of two heads mounted aligned and fed by two coils (up to 80 idle cycle/min).
Quick tool change
over: just unloose two screws and disconnect the colored tubes of compressed
air and the tool can be removed in less than one minute!
This machine is suitable for the whole range of self-fix hangers: 1, 2
and 3 holes.
Possible operation of one head only or the application of two different
types of self-fix hangers.
Very quick and precise adjustment of the two heads in the desired position
by means of hand wheels with indicator scales.
Head sliding on ground rails.
Easy adjustment of the distance between frame hook and edge from 0 to
60 mm, by simply unloosing two screws.
Advantages:
| - | Extremely limited tool head cost |
| - | Easy and quick tool head changeover |
| - | Easy and quick other size changeover |
| - | Minimum overall dimensions |
Data Sheet:
| - Working speed loadless | 70 cycle / minute |
| - Normal operating pressure | bar 4 - 6 |
| - Minimum air supply pressure | bar 2,5 |
| - Overall dimensions (B x L x H cm) | 200 x 210x 125 |
| - Max pressure | kN 13,5 |
| - Tool head weight | kg 4,5 - 5,5 |
| - Machine total weight | kg 230 |