- deutsche Beschreibung folgt demnächst -
The pneumatically operated machine PG 1350 has been designed for the application of different types of self-fix hangers onto back-boards of MDF, plywood, ect.
The machine works
by feeding pre-formed hangers from a coninuos coil.
This system allows a easy, quick and safe feeding. Therefore high production
speeds can be achieved.
The working cycle is simple and quick: the operator shall position the
back-board by using a clever adjustable stop allowing rapid location to
two positions and then press the pedal.
The pneumatic device control:
| - | coil cutting |
| - | self-fix hanger applying |
| - | next hammer feeding |
The machine is ready for the following cyle. All this is achieved in a second!
Advantages:
| - | Extremely limited tools cost |
| - | Easy and quick tool head changeover |
| - | Minimum overall dimensions |
Data Sheet:
| - Working speed loadless | 70 cycle / minute |
| - Normal operating pressure | bar 4 - 6 |
| - Minimum air supply pressure | bar 2,5 |
| - Overall dimensions (B x L x H cm) | 180 x 80x 122 |
| - Max pressure | kN 13,5 |
| - Tool head weight | kg 4,5 - 5,5 |
| - Machine total weight | kg 180 |